Camlot White + Scorpi B+

12.95

Scorpi Camera Mount + Camlot Camera Cover

The pack includes:

> ScorPi B+ Raspberry Pi Camera Mount
> Camlot leather housing for the Raspberry Pi Camera Board (white)

For additional information about the products included, please refer to the respective product page

> SCORPI B+ >

_The ScorPi B+ allows you to fix the Raspberry Pi Camera Board above (or under) the Raspberry Pi B+ in any position you want, it plugs tightly into one of the USB port of your Raspberry Pi B+ and works with or without casing. The tube is flexible but stays fixed in the position it's bent into for precise adjustments. The ScorPi comes pre-assembled with a right-angle USB brass plug on one end, and a 2mm bolt fixing on the other. Simply slide the 2mm bolt fixing through the mounting hole of the camera and bolt using the included stainless steel nut and a nylon washer from each side

> CAMLOT >

_Camlot is a leather protection for the Raspberry Pi Camera Board. The leather cut-out folds around the Camera Board and tightens with 2 fixtures through the mounting holes of the Camera Board. It is fully compatible with the ScorPi Camera Mount

> TOOLS NEEDED >

In order to mount some of the products included in this pack you will need :
– Long-nosed pliers
– Narrow flat screwdriver
– 1.5mm Allen key

> PACK DIMENSION > 90mm x 90mm x 11mm > PACK WEIGHT > 34 g

Raspberry Pi Camera Module not included / Patent pending / Beware of copies